Fluoroelastomer WF462C

Typical Properties

Instruction

WF462C is a fluoroelastomer precompound which include copolymer of hexafluoropropylene and vinylidene fluoride, curatives.

It is designed for the bonding seal such as crank shaft seals and valve stem seals.

Features of WF462C are:

1. Excellent mold release
2. Excellent hot tear resistance
3. Excellent bonding performance
4. Good mold flow

Recommended Processing Procedures

WF462C can be compounded with internal mixers or two-roll mills with standard fillers and other ingredients that are used in typical fluoroelastomer formulations. All the dry ingredients should be blended before adding to the rubbery solid. During compounding, full cooling should be accompanied. After mixing, the compound should be cooled as quickly as possible.

Packing information

WF462C is packaged with PE film in carton. The weight is 20kg net per carton.

Safety and handling

1. Store in well ventilated place
2. Smoking is forbidden Strictly in working areas
3. Avoid eye contact
4. Wash thoroughly any contacted skin and clothing After handling.
5. Further safety and handing guide, can follow the product’s Material Safety Data Sheet.